Jump to content

Girard Perregaux 03BG repaired lugs and refinished case


noirrac1j

Recommended Posts

Hello everyone,

Just satisfied my degree requirements last week, so have a little bit of time to post. Don't know how many of you run into watchcases that have worn or broken lugs....I had a Girard Perregaux watch case with the lug holes so worn I was afraid to wear it--there was just a thin band of metal left on the lug. I sent it away for plugging and redrilling of lugs plus refinishing. Very good job! This movement (GP 03bg, adjusted) has a nice looking star decoration over the non-shock protected balance jewel. I have not seen one like it before. 

J

GP 03BG 607.pdf

Edited by noirrac1j
  • Like 1
Link to comment
Share on other sites

4 minutes ago, dadistic said:

Well, congratulations on getting to the finish line with school!

Nice watch, too.

Thank you! Yes it was quite an investment in time and energy, but one that is well worth it. The GP's have a vintage look and great quality without the premium that similar Omega and Longines watches command.

J

  • Like 1
Link to comment
Share on other sites

  • 1 month later...

Congratulations Joe . 

Nice watch . I definitely like it .  With running the risk of being nosey . can you give  the details on the refinish ,...where , time it took , and cost ?  I have a case or two that I have thought about doing the same to .  PM me if you prefer...

Thanks , Louis

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • in general this shouldn't be any change. but in general questions like this it be nice to know the specifics of the watch in other words how was it performing before it was cased up and what is it doing now.
    • just as a reminder this watch is a Swatch group product. This will bring up a problem like spare parts and technical information. that I found some links to some information on when I talk about your watch and some of the technical and basically your watch is equivalent to 2834-2 for which I'm attaching the technical sheets. But equivalent does not mean exactly the same you want to do a search on the group for C07 as we discussed this watch before including the technical differences how it's supposed to be regulated and basically because it's watch group there is no parts availability. https://calibercorner.com/eta-caliber-c07-xxx/   https://www.chrono24.com/magazine/eta-movements-from-the-2824-2-to-the-powermatic-80-p_80840/ https://www.watchuseek.com/threads/h-10-movement-details.4636991/ eta CT_2834-2_FDE_481857_15.pdf
    • people be honest.... Swatch is evil for the watchmakers and repairers, BUT not everything in watches from Switzerland is from the Swatch-Group. As far as i know, Selitta got sacked by Swatch as a Movement-Assembler for them and they started to produce Movements in their own Name with slight Modifications. As far as i know, they sell Parts to the Market for their Movements. In most cases, if a ETA-Movement fails, it is a valid Option to replace it with a Selitta Movement, which i consider the Solution for this Mess with the Swatch-Group...... I have no Connection to anybody at Selitta, but being a Swiss-Guy, i still like to have Swiss-Made Watches, but not from the Swatch-Group.   ok ? regards, Ernst
    • Just one more greedy act by Swatch. They started a number of years ago here in the US..cutting off supplies to watchmakers that could build complications that many Swatch houses couldn't even touch. Old school masters who had gone through some of the most prestigious houses in the world. Otto Frei has some statements on their page about it. I tell all my customers to avoid new Swiss watches like the plague,..unless they just want an older one in their collection that still has some parts out on the market, or they have really deep pockets and don't mind waiting months and paying through the nose to get it back. Plenty of others to choose from..IE Seiko,..or other non-swiss brands Even a number of Chinese brands are catching up with the Swiss,..and I think that in time, their actions will be their downfall
    • Yes. If that's not what you are experiencing...start looking for something rubbing. A 1st guess is that one of the hands is rubbing against the hole in the center of the dial. Especially if you now have lower amplitude in face up/ face down positions.
×
×
  • Create New...