Jump to content

Greetings from Santa Cruz, California

redbat

By redbat
in Introduce Yourself Here

 Share

Recommended Posts

redbat New Member

redbat

Posted
Posted

Hello all,

I've been lurking here since 2015, but this is my first post.  

I've been interested in watches for a few years now and am now considering taking some time off of work to take the BHI distance learning courses in the hopes of making a career of watch and clock repair as an independent.

I've been acquiring tools and information for a while, and recently learned how to disassemble and reassemble a 6497 movement in preparation for the SAWTA course at the Watch Technology Institution admission test at North Seattle College.  I have recently come to the conclusion that I cannot make the move to Seattle for 2 years to attend the program, which is why I am now considering the BHI courses.

My most recent repair has been to my Maktime (Poljot) 3133 chronograph; the glass had gotten cloudy on the inside, so I had removed the movement from the case to clean the glass, and made the rookie mistake of not inserting the stem correctly, which meant removing the calendar works to reset the keyless works.  In the process of doing this, I did not correctly replace the date indicator driving wheel, which uses a small hooked wire connected to a planetary gear inside the driving wheel to move the teeth of the date wheel.  Figuring out how to adjust this correctly and reassembling the watch with a working date wheel was a wonderful feeling.

Anyway, apologies for the novel, and I'm looking forward to participating in the forum!

Link to comment
Share on other sites
dadistic Distinguished Member

dadistic

Posted
Posted (edited)

Greetings, thanks for the introduction.

It's too bad that you can't attend the school in Seattle. I think that having access to modern (and expensive) tools and equipment, along with the instructors to demonstrate how to use them, is invaluable. Especially if you are planning on making a career of this. 

But, I agree, pulling up stakes is hard. I can't do it either, at my age I'd never recoup the investment. But who knows? I may do it anyway :)

Edited by dadistic
Noticed your location
Link to comment
Share on other sites
RyMoeller Super WRT Addict

RyMoeller

Posted
Posted

Hello and welcome to the forum.

Nice job sorting out the Poljot issue.  In this line of work there is much to be learned from mistakes provided you're disinclined to throw in the the towel. 

What a great idea to take the BHI courses- that's something I should probably look into also.  I've heard about the courses offered up in Washington and I think also in Texas or Oklahoma but like you, packing up and moving isn't really an option right now.  Hopefully things will work out in your favor to keep you on your desired schedule. 

Great profile image by the way.  I just love flying foxes.  :biggrin:

Link to comment
Share on other sites
Vich Distinguished Member

Vich

Posted
Posted

Hello Redbat,

had to smile when I read your lead in. In the past I have also made all those sort of mistakes, in fact I would hazard a guess that lots of us have but philosophy jumps in to say mistakes are just lessons learned. Expletives also help in the moments after such lessons are learned of course

Welcome from me

Cheers,

Vic

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • watchweasol
      Chronograph Pusher Rod for EB8371-67 Snapped and Stuck in Button. Can't Unscrew.

      By watchweasol · Posted

      Hi. Yes I get it , the slot in the end I’d to allow you to screw the button on whilst holding the pusher shaft. To remove the pusher tube you will need a tool such as the one shown by Richard. I think Ali Express the Chinese Amazon has replicas of the Horotec system for a lot less money, how effective they are not having had to use one. But as you said the way to go is complete removal and replacement, bodging it up will  lead to a repeat failure
    • JohnR725
      Notifications

      By JohnR725 · Posted

      It does look like it seems to be working again I'm getting emails.
    • JohnR725
      30T2 adjustment of timing washers

      By JohnR725 · Posted

      One of the things that I've been bothered with lately is timekeeping? For instance a 90-year-old pocket watch what so to timekeeping was it supposed to keep? They publish railroad timekeeping but I don't know how well normal non-railroad watches were supposed to keep time. The reason why the question comes up for me is I spend a lot of time at work adjusting watches to keep really really good time  because I have to please my boss where as when the watch was made I have to wonder what kind timekeeping would've been acceptable. After all they typically didn't have timing machines 100 years ago and they were timing and six positions certainly not for the non-railroad grade watch. On the other hand I do get paid by the hour so maybe I shouldn't be concerned of how much time I Spend trying to make everything keep chronometer timekeeping almost. Citing a Delta of 40 seconds for a 90-year-old watch is quite outstanding.
    • JohnR725
      Is this pallet fork over-locking?

      By JohnR725 · Posted

      That's an interesting question which I don't think I've seen explained anywhere. But I think the problem will go away just about instantaneously. In other words the  coating is really thin and it should go away almost immediately. So the problem should resolve itself extremely fast.  
    • VWatchie
      Is this pallet fork over-locking?

      By VWatchie · Posted

      I experienced that different types of shellac and their ages are affected differently by IPA. Sometimes the shellac dissolves in a few seconds and sometimes several minutes are required. Nowadays I never let shellac come into contact with IPA. It's a hotly debated topic here on WRT if you search. Like John, I don't think you need to worry about the weight of the shellac, but instead that it might start rubbing against something. When I learned how to adjust pallet stones, I tried documenting my experiences in this thread. Hopefully, it can help you. I personally don't believe in the idea of abrading the epilame before oiling so I don't think you need to think or worry about it. The only time I've heard anyone mention this is Alex on the YouTube channel Watch Repair Tutorials but actually no one else. I'm not saying it's "wrong" just that I don't think it's necessary or adds anything.
×
×
  • Create New...