Repair of vintage demagnitizer

[jdrichard]

Just purchased a vintage demagnitizer and it did not work. So into the guts I went.

 

I disassembled the demagnitizer and found that one of the power leads that was previously soldered to a plate had detached. So to repair it, I drilled a hole in the plate and prepped the cable (cleaned) into the hole; then soldered it into place. It now works. Discount on next purchase:)

 

 

 

Sent from my iPhone using Tapatalk Pro

[vinn3]

good job !  I use one of that type and one even older.  the older one puts out a much stronger field.  i'll enter photos in the gallery.  vinn

[jdrichard]

good job !  I use one of that type and one even older.  the older one puts out a much stronger field.  i'll enter photos in the gallery.  vinn

Thanks Vinn


Sent from my iPhone using Tapatalk Pro

[Watchtime]

NOw that is what I call vintage....cool....

[jdrichard]

NOw that is what I call vintage....cool....

It was made before electricity


Sent from my iPhone using Tapatalk Pro