Jump to content

Today’s Competition 2


oldhippy

Recommended Posts

My thoughts on the clocks are,

1 American Pillar and Scroll clock

2, American Ogee clock

3 English 19th century double fusee libary clock, looking at the movement I would describe it as a platform lever, it has a pull repeat and soft or loud switch on the side and the case is probably a five glass. a very fine clock if my house had a library I would want this.

4 French Empire style Portico clock

5 French Ormolu Figural clock

6 This is a Balloon clock not sure wether this is English or French but this one will have a 8 day platform movement

Link to comment
Share on other sites

1st Not sure but I think it is American

2nd American 30hour wall clock most likely a Ansonia movement

3rd Fusee striking mantel clock with a platform escapement 

4th Portico piler mantel/bracket clock possibly French

5th A good quality French mantel clock. A gilded bronze case

6th Inlaid ballon style clock

Link to comment
Share on other sites

Well 137 views and only a few responded. :angry: Because wis1971 had another think about the English Carriage Clock you again got them all correct. clockboy a close second. 

Thanks folks. I will have to think of something different next time.

 

Link to comment
Share on other sites

I wanted to play but had no idea... Anyhow, my guesses were as follow:

1- wall clock with a painting

2- wall clock with a glass window

3- mantle clock with a handle

4- fusee clock with no case

5- greek column style clock :)

6- fancy golden clock with some person sitting on it

7- funny looking mantle clock

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • That's a good idea - shrinking down the nut and wrench size from the old casebook trick!
    • I missed this earlier. The dial isn't going into the holder, it should sit proud of it. This is what I am currently using which I print for each different movement.    
    • I didn't think pulling to set position would work harden the spring, in that position it is stressed where the arm starts. By work hardening i meant rapid polishing at that point, a bit like polishing a pivot work hardens as it compresses the steel. I doubt polishing by hand would achieve much in that respect though. Its finished, arm polished up mostly at the join to the bridge's main body. I'm ok with it, the screw holes aren't great as i had to open them up by redrilling and positioning it was difficult, I'm not much use with a loupe, opening up with a file might be a better option for me or i could just use the correct drill size 😅. And the detent is way too deep, i had to guess that with the stem release out of position and sat on top, but i only took one measure and went for it, no slowly slowly catch your monkey 😅. First go I'm happy , well sort of, it works and thats a big thing for me, next one will have a bit more finesse.  Anyone thats interested, after filing, i used a 2000 grade home made diamond  micro file and then 20 micron film, the film is much better than wet and dry, more stable to use and doesn't shed cheap grade grit everywhere , then auto polish on a sponge pad.
    • I'm assuming that every time you set the watch you are work hardening the detent spring, maximum hardening is  where it meets the plate due to maximum deflection.   That's why it snaps there.  The Young's modulus may be the same but after it's reached its maximum yeid strength it breaks.  My mechanic engineering is very rusty, correct me if I'm wrong. 
    • Ah ok yes that makes sense to polish it where the arm starts to form from the body of the bridge, i thought you meant the underneath of all the arm.
×
×
  • Create New...