Jump to content

Do these hands (Hour & Minute) look misaligned to you guys?

SSTEEL

By SSTEEL
in Watch Repairs Help & Advice

 Share

Recommended Posts

rogart63 Distinguished Member

rogart63

Posted
Posted

Looks alright to me.  How does it look if you set the time at 6 a clock. Are they inline then?  Have experienced some slack in the hour wheel on some movements . Making the hand get in different positions if you turn the hands backwards or forwards. But never heard anyone complain about it. 

Link to comment
Share on other sites
SSTEEL Distinguished Member

SSTEEL

Posted
  • Author
Posted

At six o'clock its bang on too.  Using the dial printing as a horizontal rule, with the hands set at six o'clock, I have four perfect right angles (45 degrees reference points).

Agree with the slack on some movements, this movement is an Asian 7750 and it does indeed have quite a bit of play.

Some people with these reps have far more unreal expectations of them than any of my genuine watch brand customers.

  • Like 3
Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
Posted
1 hour ago, SSTEEL said:

At six o'clock its bang on too.  Using the dial printing as a horizontal rule, with the hands set at six o'clock, I have four perfect right angles (45 degrees reference points).

Agree with the slack on some movements, this movement is an Asian 7750 and it does indeed have quite a bit of play.

Some people with these reps have far more unreal expectations of them than any of my genuine watch brand customers.

Maybe he should go to a optician instead :) 

  • Like 1
Link to comment
Share on other sites
Ishima Super WRT Addict

Ishima

Posted
Posted

I've actually never had a customer complain about the precision of my hand setting, and that's not to suggest mine has always been perfect. In my experience customers are usually extremely ignorant of the hand setting accuracy, they bring watches in that are off a solid 15 minutes and don't notice until I tell them. Pretty typical you'd get someone so picky on a replica though. Tough situation. I second about the dial printing, I also think that many genuine watches of various brands dont print their dials in a way that allows the hands to show truly perfectly at every position. He surely expects too much.

  • Like 1
Link to comment
Share on other sites
omgiv WRT Addict

omgiv

Posted
Posted

I have to agree with everyone else.  They look good to me.  Panerai hands can be kind of tough because there aren't a lot of reference markers.  Add the fact that production accuracy (of the dial or movement) may not be a high priority and you have a perfect storm.

 

It may not be a good business practice, but If if were me and the customer is that picky I would send the watch back free of charge and not accept anymore work from them.  You just can't please some people and it sounds like you have bent over backwards trying to do so.

  • Like 3
Link to comment
Share on other sites
SSTEEL Distinguished Member

SSTEEL

Posted
  • Author
Posted

I will have to let this customer go.  I so prefer to work on genuine brand watches as my day job, but you'd be surprised of some flaws I have found with these too, the latest, a Tutima, the inner chapter ring was misaligned.

  • Like 1
Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      Unfortunately I'm not that lucky. I started on the train side and after I noticed the binding I pulled everything out except the driving wheel to rule everything else out. It still binds. I'm going to double check that the pinion is fully seated on the staff first, then if no joy I'll push the bridge jewel up a fraction of a mm. Fingers crossed!
    • Waggy
      Rado rotor removal

      By Waggy · Posted

      Happy to have helped, great way to start the day with a win! 🥳
    • doober
      Rado rotor removal

      By doober · Posted

      Thank you for the advise!! It worked. The setting screw was a lock/unlock to remove the rotor. 
    • GuyMontag
      1972 Bulova President "E" Sea King 11ACACB movement

      By GuyMontag · Posted

      I have that French tech sheet too, it is a little different than the English one (eg, it doesn't have the auto works diagram). BTW, it looks like you are looking up the case number in the 1979 ABC supplement. The 1974 ABC catalog does have the 3093 case. As you determined it takes the 1222-5 crystal.  When I serviced my President 'A' (which also takes that crystal), I was able to fit a 29.8 crystal from my DPA crystal assortment. Those are, in my opinion, a great deal. The assortment comes with 10 sizes each from 27.8mm to 32.4mm in 0.2 increments. I pretty much use them for any non-armored crystal that takes a high dome crystal. I think they no longer make them but Cousins has still has some in stock but when I bought them they were around $40 for the set and now they are around $100. Still, at 40 cents a crystal it's still a good deal. For the large driving wheel, I remember I once assembled the keyless/motion works first and when I placed the large driving wheel it was interfering with the setting wheel on the dial side as the teeth were not fully meshing and it wouldn't fully seat. If that isn't the issue I got nothing and am looking forward to see how you solve it 🙂
    • Waggy
      Rado rotor removal

      By Waggy · Posted

      Not sure, but just looking at it, it seems like the screw on the right may be a fake? The one on the left may not be a screw in the regular sense at all, rather a 2 position device, I think you need to point the slot towards either of the 2 dots and one will secure and one will open. Like I said this is just my best guess looking at the pictures.
×
×
  • Create New...