Jump to content

Guitar and watch repair


Recommended Posts

Not exactly combining the two but I did build a custom strat once - it was fun, but i ended up taking it to a pro in order to adjust the neck and frets, he did an amazing job.
IMG_0056.thumb.JPG.3e55f6069d0660f65a8dea82dd2886d8.JPG

Very nice piece. I have a Strat Plus with all the best hardware. I built a solid body Less Paul copy once and had an artist paint all my guitar hero's on it. I'll have to post it. Been playing rock and blues for 50 years; started at 8.


Sent from my iPhone using Tapatalk Pro
Link to comment
Share on other sites

I also combine the two been playing since i was about 12 but I,m now learing how to play again after my stroke last year it is smashing therapy tho gets your brain working again. luckily it was on the right side so my fingering hand wasnt affected but strumming sometimes is a pain but the pickings ok for lead breaks sort of lost the use of my wrist.

  • Like 3
Link to comment
Share on other sites

My Dad repaired watches for half a century and played lead guitar and mandolin on weekends for just as long.  He made both look easy... B)

My sisters and I sometimes helped him pack up his instruments after a gig.  One time, my sister put his Les Paul behind the car... he thought she'd put it in the trunk (boot) and he backed over it.  Yikes!!! :startle: 

He bought another guitar and gave the broken guitar to his friend, who rebuilt it and played it for years.  

By some miracle my sister is still alive. :unsure:

  • Like 3
Link to comment
Share on other sites

I took the stock pickups off my Epiphone Les Paul Standard II and replaced them with Gibson pickups. I am using the coils to rewind a quartz watch coil.  Does that count as mixing Guitar repair with watch repair?

Very very good mix in technology. However, you should have used phat cat pickups I on the Epiphany to get the bite. I do need to create a spring for an Elgin I am repairing and never thought of perhaps using an E string for the click spring; thoughts?


Sent from my iPhone using Tapatalk Pro
Link to comment
Share on other sites

I am the one on the left. The guy on the right is my friend Jim. The guitar I am holding is a Rhyne acoustic steel string. I worked with Jay Rhyne from 1971 to 1977 building guitars and designing the machinery we used to make the guitar parts. Jay died a few years ago after a long illness and these guitars are quite rare.

 AgXPD78CAAEBzmr.jpg

david

  • Like 3
Link to comment
Share on other sites

I am the one on the left. The guy on the right is my friend Jim. The guitar I am holding is a Rhyne acoustic steel string. I worked with Jay Rhyne from 1971 to 1977 building guitars and designing the machinery we used to make the guitar parts. Jay died a few years ago after a long illness and these guitars are quite rare.
 AgXPD78CAAEBzmr.jpg
david

Sad for your friend. I too have made a few solid body guitars. However, i found that making guitars and producing takes away from playing....so now I play.b70d188399c0734ff9f208896118548c.jpg

Sent from my GT-N5110 using Tapatalk

  • Like 1
Link to comment
Share on other sites

Not exactly combining the two but I did build a custom strat once - it was fun, but i ended up taking it to a pro in order to adjust the neck and frets, he did an amazing job.
IMG_0056.thumb.JPG.3e55f6069d0660f65a8dea82dd2886d8.JPG

What is with the wires coming out of the jack?

Sent from my GT-N5110 using Tapatalk

Link to comment
Share on other sites

My Dad repaired watches for half a century and played lead guitar and mandolin on weekends for just as long.  He made both look easy... B)
My sisters and I sometimes helped him pack up his instruments after a gig.  One time, my sister put his Les Paul behind the car... he thought she'd put it in the trunk (boot) and he backed over it.  Yikes!!! :startle: 
He bought another guitar and gave the broken guitar to his friend, who rebuilt it and played it for years.  
By some miracle my sister is still alive. :unsure:

You can check out some of my guitar on YouTube, here is the link.


Sent from my GT-N5110 using Tapatalk

Link to comment
Share on other sites

8 hours ago, jdrichard said:

This is me playing Santana on my aluminum chromed guitar

 


Sent from my GT-N5110 using Tapatalk
 

 

Europa is one of my favorite songs on the whole planet... oh, and on Jupiter, too.  You do it justice... 

  • Like 1
Link to comment
Share on other sites

On 3/22/2017 at 0:55 PM, Sleeper said:

I took the stock pickups off my Epiphone Les Paul Standard II and replaced them with Gibson pickups. I am using the coils to rewind a quartz watch coil.  Does that count as mixing Guitar repair with watch repair?

:D

  • Like 1
Link to comment
Share on other sites

20 hours ago, jdrichard said:


Very very good mix in technology. However, you should have used phat cat pickups I on the Epiphany to get the bite. I do need to create a spring for an Elgin I am repairing and never thought of perhaps using an E string for the click spring; thoughts?


Sent from my iPhone using Tapatalk Pro

I was going for reliability over changing the sound. So the Stock USA made Gibson pickups seemed right.  Also I am a drummer but sometimes I have to work out cords so I have a guitars for that.  I wife is a flute player that plays only wooden native craftsman made flutes. So I play her backup sounds. So I have way more drums, cymbals, chimes, rattles, gongs and things that go pop and clack than anything with strings.

As far as using a E string for a spring, it has lots of nickel in it and so I bet it won't temper to spring hard.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • although not in this case.  It was the Lugano Convention and its deficiencies that allowed a Swiss court decision in the first place.  This isnt really a Brexit issue at all.  A decision that affects both the EU and the UK should never have been heard in Switzerland.
    • Hi guys I think that old hippy is correct, it opens the gates for china to manufacture aftermarket spare parts. considering that they already do work on behalf of the Swiss I guess this decision gives the a little more legitimacy to tool up and I am sure they will take advantage of the situation either with or without the blessing of the Swiss watch industry  Having read about the protectionist machinations of the Swiss in the history of Europe they were the only ones to get fat at everybody else’s expense. I think the outcome could have been guessed at but ,  fair play to Cousins UK for standing up to them.  Now the question,  will everybody boycott Swiss watches and Swatch, no way they will still fill their coffers.  Me I stick with the Japanese once renowned for cheap shitty watches who came good through industrial effort and don’t for get the Russians that most dismiss as low grade crap. Wouldn’t buy a swatch product ever how about you all.? a
    • Hold the crown when in winding position, move the click away from the crown wheel, and then while holding the crown let it slowly unwind. I recollect that you must remove the automatic device bridge first, but maybe I'm wrong. You can first try without removing the automatic device bridge.
    • nevenbekriev- You nailed it with your description of me and my reaction when the clock started ticking again. I am a newbie.  I love the sound and idea of mechanical clocks but the idea of owning one and trying to keep them running has never appealed to me. My wife bought this one and an antique German wall clock.  When I looked into having someone repair them for me, the universal response was "it's really expensive to work on them, you should just replace the movement". So, I had nothing to lose, I started researching them and opened them up. The wife is happy because she hears the sound of the clocks again. But I have gone down the "accuracy" rabbit hole. In the vertical position, the balance wheel was not floating. It was sitting on the bottom of the frame. I adjusted the lower spring collet and got it floating. It easily passed the 270 degree 3 to 5 minute oscillation test. It took 8 minutes for the wheel to completely stop moving.  I put it the unit back in the movement and checked the safety pin. It does not touch the safety roller anywhere in +/-270 degrees rotation from neutral position. But the amplitude of the rotation with the spring fully wound is weak based on what you are saying. It rotates +/-90 degrees from the neutral position.  No, I did not take the movement completely apart.  That seemed way outside my skill set at the time. There is a reason I became an electrical engineer and not a mechanical engineer. I am much more comfortable with moving electrons than tiny moving metal parts. Will I do it in the long run? Anything can happen. I don't seem to be able to let it go.
×
×
  • Create New...