Jump to content

Tweezers advice?


Recommended Posts

Tcarpilot,

I bought a set of very nice tweezers from an Ebay company called RED ROOSTER UK. I don't know if they still carry the same brand I bought but it might be worth checking them out. At the time I only paid $30.00 for the entire set and they worked great.

david

Link to comment
Share on other sites

The brand of tweezers I purchased from Red Rooster UK were called Stella Tweezers. They were very well made and have performed beautifully over the past several years. I also bought a set from Finding King called Moon Tweezers. The Moon tweezers had to be reworked with a sharpening stone in order to get them to work properly but the Stella tweezers worked perfectly right out of the pack. I don't know if Red Rooster still carries that brand or not. The only tweezer I was not able to find a less expensive substitute  for, was the Dumont #5. Other than that the Stella's have worked out just as well as my Dumonts.

david

Link to comment
Share on other sites

Most tweezers are designed and manufactured for the medical and dental industries. The angled tips are useful in a restricted work space such as someone's mouth. The world has a lot more doctors and dentists than watchmakers. Some of the tools that watchmakers and jewelers use have been borrowed from other industries.

david

Link to comment
Share on other sites

  • 2 months later...

Whilst engaged in another thread a question kept coming to mind but it didn't really belong there. So I'll ask here.

With tweezers do you prefer stainless steel or high quality carbon steel ? Or do people not really care.

My own preference is carbon steel because it will retain its shape well and when "stressed" is easily corrected, which is not the case with stainless

 

Sent from my SM-G920F using Tapatalk

 

 

Link to comment
Share on other sites

Stainless for disassembly Brass for assembly thats my preference.

I can see why you would do that. Stainless incase something doesn't come out or off the way it should and brass minimising risk of scratches and damaged to tweezers. That's very clever ! I will adopt this myself with my brass tweezers.
Many thanks for your reply

Sent from my SM-G920F using Tapatalk

Link to comment
Share on other sites

' stressed tweezers !! ' why ? Because in my personal sense, you do not raise a brick or you do not squeeze a piece out of hand? For the sorts of metals concerning the tweezers, I imagine that everyone makes use of what he has provided that they are not magnetised. Finally, if we take care of our tools, I can easily imagine that we should not be forced to twist our tweezers. On the other hand, for screwdrivers, it is different because I saw tons of watchmakers On Youtube that work poorly and do not take the proper size of screwdriver for different screws ... I do not know much about watchmaking but my tools, I take care of it ;)

Link to comment
Share on other sites

' stressed tweezers !! ' why ? Because in my personal sense, you do not raise a brick or you do not squeeze a piece out of hand? For the sorts of metals concerning the tweezers, I imagine that everyone makes use of what he has provided that they are not magnetised. Finally, if we take care of our tools, I can easily imagine that we should not be forced to twist our tweezers. On the other hand, for screwdrivers, it is different because I saw tons of watchmakers On Youtube that work poorly and do not take the proper size of screwdriver for different screws ... I do not know much about watchmaking but my tools, I take care of it [emoji6]

In this context it refers to the ability to retain shape under normal and unforseen circumstances.
Cheap steel has no flexibility to return to shape so constant maintenance would be required.
English gunmakers prefer a mild steel (EN21) in their gun barrels! Though this quality steel enjoys a great deal of flexibility to return to shape even when pushed beyond its normal working pressure. Due to faulty ammunition.
German makers tended to use a much harder steel. Though could shatter with fatal consequences when pushed beyond its normal working pressure. This rarely happened .
It's all a question of getting the right balance.

Sent from my SM-G920F using Tapatalk

Link to comment
Share on other sites

I've used brass and carbon steel exclusively.  The brass tweezers are used about 95% of the time but they require a bit of maintenance since brass is soft and prone to deform.  The carbon steel come in handy for the real precision work but they will scratch parts quite easily and are prone to magnetism.

Eventually I'll expand my kit and probably add a set of stainless tweezers.  I'm hoping there will be a few more people piping in regarding the pros and cons of stainless tweezers in this thread.  :)

Link to comment
Share on other sites

Well, now i understand the differences [emoji6]  but but for the watches, no need to stress a tweezers  ....Thanks guys for the reply [emoji6]

You'll find the most experienced watchmaker will need to re-shape (Dress) his tweezers and they apply their craft to this in a most proficient and expert way and is an essential skill that needs to be learnt. [emoji4]

Sent from my SM-G920F using Tapatalk

Link to comment
Share on other sites

I dress mine every week especially the gripping surfaces I grip a file between the ends and gently move the file this gives the tweezers more grip.

Check this video its very informative.

 

Edited by Cad101
  • Like 2
Link to comment
Share on other sites

Love my new Dumont Titanium tweezers? So light. And not that sensitive for bending. Can ping a few screws if you press to hard on them. But once you master that i no problem: Great for working quartz and the don't get magnetic. Bought a 5 and  a 2. Dressed the 5 sharp tip a little as it was like a needle :) 

  • Like 2
Link to comment
Share on other sites

Carbon steel tweezers can be glass-hard. My stainless Dumonts are softer and still get magnetised slightly anyway. I also have their "Dumostar" versions which are very hard, to be fair. 

As already mentioned, dressing them is very important, including giving the insides a slightly co**BLEEP** finish to provide grip. 

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Dell fancy a challenge🤣   https://www.ebay.co.uk/itm/285785684626?itmmeta=01HT29WVJY21Q94C73GYHGBTFX&hash=item428a277a92:g:15YAAOSwNRVmBAUz&itmprp=enc%3AAQAJAAAA0DIe4QLQBW66rSyIMiyBuk8GY%2B86pQ%2BQnxGbcNq7egAGe5DIs9YMmiWJIbZtMSxwNJIiJxuojbq523IeUSBQ6pJEIQ0tfz2ChrBR03BksmKINyklg1IK4GAfAcYY9Hta9wVeSZSZN7ZCNAfZTgKs9c4%2BUIUZ3Qjc3QjUXDn2uPRo1FiYOEewMG5A26EXb%2BclBgrqtbOmM6P3bea%2F8ZImOAXNI1HtbmtMk84pIGoM6ISwaM1PKFuADtTFMccS5e3ZjndCbXYXHrW3CecsV0edw3M%3D|tkp%3ABk9SR8q588nQYw Darwin’s theory of evolution has not been proven to be absolutely.  😀 
    • A already know the size movement I have the problem is the dial a had purchased has a dimension 20.6mm wide a want to find a watch case that going to fit the dial perfectly 
    • Hi.  I would like to take issue here regarding battery driven , watches, clocks,etc. I will and do repair these clocks in fact I have sever al in my collection as well as the regular mechanical ones. I have one on my mantle piece over 60 years old tha belonged to my wife’s Aunt,  long gone Iam afraid and it has been cleaned etc and never missed a beat and is accurate. Every one has their preduices as regards Electrical /electronic Horology but I regard it as part of the progress time line of the art of Horology and to be treated as such. Like Darwin’s theory of evolution it evolved.  Two cavemen knocking rocks together and a shard broke off , looking at it he worked out if it was stuck on the end of a stick he would have a spear. Likewise his pal seeing what he was up to picked up a piece  and did the same, now that’s evolution. Some clockmaker decided to build a clock that ran with a battery and no spring to wind up and break, progress and both the mechanical and battery driven clocks evolved, the battery ones got better to the point that if it broke you changed the complete unit. Likewise watches did the same but both can be repaired by people who approach Horology with an open mind without preduice.  We all have our likes and dislikes bu I for one would never dismiss any technology because I don’t like it.   The mobile phone is a good example of modern technology at work as is the automotive industry. There buttons and switches in my car I don’t use because to me they are not nesessary but I still drive the car.
    • I haven't gone through all the reading of what it might be or not. The first thing I would do if nothing obvious stands out is replace the mainspring, you have to start at the source of the power. Nine times out of ten that is the problem.  
    • Haha. You're just in a wicked mood today John 😅
×
×
  • Create New...