Jump to content

Free Moebius D5 with short shelf life

MikeAdvicePI

By MikeAdvicePI
in Tools & Equipment

 Share

Recommended Posts

MikeAdvicePI Member

MikeAdvicePI

Posted
Posted

I have some Moebius D5 I bought from Cousins last year. It's a 20ml bottle which I'm unlikely to finish in my lifetime, let alone between now and the end of April 2017 which is the shelf life expiry date of this batch.

DSC_0776.jpg

 

 

I haven't been able to find a clear answer to just what the expiry date means for the oil in the bottle. Does it mean the oil should no longer be used from that date? Does it mean that if you use it at the end of the shelf life period the oil will do its job for another two or three years in the watch? Either way, as a tinkerer I'd be content to use it for the next couple of years. That would still leave me with more D5 than a hobbyist would ever need, so I'm planning to keep 2ml and I'm offering the rest of the bottle to other tinkerers in either 1ml or 2ml doses.

DSC_0775.jpg

I have some new small 2ml glass bottles, an unopened syringe and a blunt mixing needle to decant the oil without contamination. You can have it for free, but I'll provide my paypal address in the package if you want to make a voluntary contribution to the P&P. If all of the oil is taken I'll post an update in this thread.

DSC_0774.jpg

PM me with a postal address and tell me whether you would like 1ml or 2ml.

  • Like 7
Link to comment
Share on other sites
digginstony Super WRT Addict

digginstony

Posted
Posted

Interesting regards oil shelf life. Synthetic has practically replaced the old type oils. I wouldn't rush to dispose of your surplus d5. I would be happy to use in 2017 and service the movement or inspect it 3 years later. As a hobby where low volume of oils is going to be used, mobius 9104 is a far better choice than d5. It's suitable for all d5 applications and is fully synthectic and is good for 5 to 7 years at least.
I sort of think regards shelf life while the oil is reducing friction, lubricating, not gumming up, it's good to go.
I suspect specific shelf life is more to do with marketing ploys than reality but it shouldn't be ignored

Sent from my SM-T585 using Tapatalk

  • Like 2
Link to comment
Share on other sites
  • 2 weeks later...
rodabod Distinguished Member

rodabod

Posted
Posted

I suspect there's a lot of snake oil (pun not intended) in the watch oil industry. Synthetic oils are not necessarily better in all respects, and natural oils have their own advantages in some cases. I wouldn't be surprised if this bottle of D5 was perfectly useable for several years. Perhaps the only fair way to test would be to leave droplets alongside some alternative oils and monitor how they deteriorate over a long time. 

Link to comment
Share on other sites
  • 2 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • RichardHarris123
      Introduction

      By RichardHarris123 · Posted

      Hello and welcome from Leeds. 
    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      Unfortunately I'm not that lucky. I started on the train side and after I noticed the binding I pulled everything out except the driving wheel to rule everything else out. It still binds. I'm going to double check that the pinion is fully seated on the staff first, then if no joy I'll push the bridge jewel up a fraction of a mm. Fingers crossed!
    • Waggy
      Rado rotor removal

      By Waggy · Posted

      Happy to have helped, great way to start the day with a win! 🥳
    • doober
      Rado rotor removal

      By doober · Posted

      Thank you for the advise!! It worked. The setting screw was a lock/unlock to remove the rotor. 
    • GuyMontag
      1972 Bulova President "E" Sea King 11ACACB movement

      By GuyMontag · Posted

      I have that French tech sheet too, it is a little different than the English one (eg, it doesn't have the auto works diagram). BTW, it looks like you are looking up the case number in the 1979 ABC supplement. The 1974 ABC catalog does have the 3093 case. As you determined it takes the 1222-5 crystal.  When I serviced my President 'A' (which also takes that crystal), I was able to fit a 29.8 crystal from my DPA crystal assortment. Those are, in my opinion, a great deal. The assortment comes with 10 sizes each from 27.8mm to 32.4mm in 0.2 increments. I pretty much use them for any non-armored crystal that takes a high dome crystal. I think they no longer make them but Cousins has still has some in stock but when I bought them they were around $40 for the set and now they are around $100. Still, at 40 cents a crystal it's still a good deal. For the large driving wheel, I remember I once assembled the keyless/motion works first and when I placed the large driving wheel it was interfering with the setting wheel on the dial side as the teeth were not fully meshing and it wouldn't fully seat. If that isn't the issue I got nothing and am looking forward to see how you solve it 🙂
×
×
  • Create New...