Jump to content

Rolex Real or Fake


Recommended Posts

Man if that was an Omega Constellation I would chime right in...:)

The bezel colour and finish look to be very poor quality...almost garish for a Rolex. But then I have only ever seen pictures of a Rolex and never had one in hand... also on the underside of the top link of the bracelet the finish looks very rough and course. Need a better front shot to asses the dial better...Also  the finish on the bracelet is again very course, although the bracelet could have been changed. It almost looks like the lume pip for the bezel is not centered on the triangle?? perhaps the angle of the shot...or not...

Something about that bezel...is the center tine of the Rolex crown in line with the 12 marker triangle?

I say fake, but only going by a poor picture and no experience and the fact that there are more fake Omega's and Rolex's than there are the real thing.

Of course opening her up will tell the tale :)

Ron

  • Like 1
Link to comment
Share on other sites

Hmm lets see, well there's just nothing  right  about it what so ever, it's a complete turd. Bezel from a GMT incorrect, date window magnification way off, hour markers wrong, dial wrong, I think your having a laugh :D 

  • Like 2
Link to comment
Share on other sites

I think I do have the answer. The strap is a Walmart special :) The Rolex strap is missing a connecting link ( to be purchased). This watch was picked up in Egypt by a pilot friend of mine. The average Joe would do not know it is a fake. It actually has the weight and feel of an original.18b953786973214334969e1b1233bec6.jpg


Sent from my iPhone using Tapatalk Pro

Link to comment
Share on other sites

In an effort to combat fakes, more than a few years back Rolex started putting engraved "Rolex" inside the dial, around the rim above the dial, one quick way to tell... even then the fakers quickly came up with that same look. Dials, hands, crystals and even weight are a quick way to tell, if it doesn't look or feel right, probably isn't, also Rolex has their own brand/blend of stainless steel,(not like 316L) I read somewhere, that won't discolor when polished, usually the stem will break on copies if unscrewed or the date wheel will break, not worth much effort for parts, IMHO.

20 hours ago, wls1971 said:

it's a complete turd.

Agreed, there are better fakes, Complete turd!:biggrin:

  • Like 1
Link to comment
Share on other sites

In an effort to combat fakes, more than a few years back Rolex started putting engraved "Rolex" inside the dial, around the rim above the dial, one quick way to tell... even then the fakers quickly came up with that same look. Dials, hands, crystals and even weight are a quick way to tell, if it doesn't look or feel right, probably isn't, also Rolex has their own brand/blend of stainless steel,(not like 316L) I read somewhere, that won't discolor when polished, usually the stem will break on copies if unscrewed or the date wheel will break, not worth much effort for parts, IMHO.

Agreed, there are better fakes, Complete turd!:biggrin:


I'm glad I did not buy it :). It was a gift for fixing his other fake.3a9e964fdf6814dab0ae6674baedaaa6.jpg


Sent from my iPhone using Tapatalk Pro
Link to comment
Share on other sites

I personally have not got any problems with fakes/copies providing they are sold as such. It's when they are sold as genuine that is the real issue for me. As far as repairing I avoid and refuse to touch them. What worries me is after the repair and it is then sold as genuine am I then party to the fraud ?

  • Like 3
Link to comment
Share on other sites

I personally have not got any problems with fakes/copies providing they are sold as such. It's when they are sold as genuine that is the real issue for me. As far as repairing I avoid and refuse to touch them. What worries me is after the repair and it is then sold as genuine am I then party to the fraud ?


My main concern with a service of this watch is that, if I pooch a part i would not know how to get a replacement as I really can't identify the movement.

Sent from my GT-N5110 using Tapatalk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • people be honest.... Swatch is evil for the watchmakers and repairers, BUT not everything in watches from Switzerland is from the Swatch-Group. As far as i know, Selitta got sacked by Swatch as a Movement-Assembler for them and they started to produce Movements in their own Name with slight Modifications. As far as i know, they sell Parts to the Market for their Movements. In most cases, if a ETA-Movement fails, it is a valid Option to replace it with a Selitta Movement, which i consider the Solution for this Mess with the Swatch-Group...... I have no Connection to anybody at Selitta, but being a Swiss-Guy, i still like to have Swiss-Made Watches, but not from the Swatch-Group.   ok ? regards, Ernst
    • Just one more greedy act by Swatch. They started a number of years ago here in the US..cutting off supplies to watchmakers that could build complications that many Swatch houses couldn't even touch. Old school masters who had gone through some of the most prestigious houses in the world. Otto Frei has some statements on their page about it. I tell all my customers to avoid new Swiss watches like the plague,..unless they just want an older one in their collection that still has some parts out on the market, or they have really deep pockets and don't mind waiting months and paying through the nose to get it back. Plenty of others to choose from..IE Seiko,..or other non-swiss brands Even a number of Chinese brands are catching up with the Swiss,..and I think that in time, their actions will be their downfall
    • Yes. If that's not what you are experiencing...start looking for something rubbing. A 1st guess is that one of the hands is rubbing against the hole in the center of the dial. Especially if you now have lower amplitude in face up/ face down positions.
    • Once a movement has the dial and hands put back and it is recased, would you expect the assembled watch to have the same amplitude as when the movement is in a movement holder and is without hands and dial? Thanks
    • C07641+ not sure what the "+" is for after the last digit.
×
×
  • Create New...