Jump to content

Buying from Cousinsuk

rogart63
 Share

Recommended Posts

SSTEEL Distinguished Member

SSTEEL

Posted
Posted

For some reason, I started experiencing problems paying with my card, the very same card IUve been using for the last couple of years, each time I try to pay for an order, I get transaction failed notice.

I contacted my bank, and they said there's nothing wrong with the card, or the cards permissions, nothing has changed etc,

So what I ended up doing is applying for a new card from the bank, and this now works, very strange.

  • Like 1
Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
3 hours ago, SSTEEL said:

For some reason, I started experiencing problems paying with my card, the very same card IUve been using for the last couple of years, each time I try to pay for an order, I get transaction failed notice.

I contacted my bank, and they said there's nothing wrong with the card, or the cards permissions, nothing has changed etc,

So what I ended up doing is applying for a new card from the bank, and this now works, very strange.

I had exactly the same happening to me, while researching I learned two important things.

  • The billing/shipping address of the Cousins order need to match the card billing address. According to Cousins it has to be only for the first order, but I've found differently.
  • The customer service representative of the bank doesn't see the charging attempt, but the security specialist does and advised me of the reason.above. 
  • Like 2
Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
  • Author
Posted
4 hours ago, jdm said:

I had exactly the same happening to me, while researching I learned two important things.

  • The billing/shipping address of the Cousins order need to match the card billing address. According to Cousins it has to be only for the first order, but I've found differently.
  • The customer service representative of the bank doesn't see the charging attempt, but the security specialist does and advised me of the reason.above. 

Iwill check that . tried to log in to Cousinsuk on the phone. That didn't work either? No did getting a new password through the phone.So i can only reach cousinsuk throught the computer? Tried both Mobile bank Id and using password to verifie my order? Nothing works. But will check the adresses. 

Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
Just now, rogart63 said:

Iwill check that . tried to log in to Cousinsuk on the phone. That didn't work either? No did getting a new password through the phone.So i can only reach cousinsuk throught the computer? Tried both Mobile bank Id and using password to verifie my order? Nothing works. But will check the adresses. 

They are always helping and patient both on the phone and online. But they could not help with the issue because the purchase approval policies are set by their credit card processor, not them, It is also possible to place orders on the the phone, that will just remove the small online discount.

Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
  • Author
Posted
1 hour ago, jdm said:

They are always helping and patient both on the phone and online. But they could not help with the issue because the purchase approval policies are set by their credit card processor, not them, It is also possible to place orders on the the phone, that will just remove the small online discount.

I was more thinking of opening cousinsuk on internet on the phone:) And logging in that way? Using my mobile bankid account that i have in the phone. 

But i couldn't log in with my email address and password? 

Hope it works out? Or i will have to order a new card. But there are som many other things i have to change if i do? Paypal is the most difficult. 

Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
25 minutes ago, rogart63 said:

I was more thinking of opening cousinsuk on internet on the phone:) And logging in that way? Using my mobile bankid account that i have in the phone. 

I think that the C/C verification process (verified by Visa / MC SecureCode) is the same even using the app.

Link to comment
Share on other sites
Pip WRT Addict

Pip

Posted
Posted
For some reason, I started experiencing problems paying with my card, the very same card IUve been using for the last couple of years, each time I try to pay for an order, I get transaction failed notice.

I contacted my bank, and they said there's nothing wrong with the card, or the cards permissions, nothing has changed etc,

So what I ended up doing is applying for a new card from the bank, and this now works, very strange.


Your credit card has been working fine when I've been using it. [emoji41]


Sent from my iPad using Tapatalk
Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
  • Author
Posted

Finally i got it . Had to order a new password for Cousisnuk. Then logged in via my phone. Could see my basket and filled in the cardnumber . And signed it with mu mobile bank id. First i had to open the mobile bankid. And go back ti cousinsuk and signed the order. Have now got a mail that the order is purchase. Well as long as i now how to do it next time it's okay? 

Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
  • Author
Posted (edited)
13 hours ago, jdm said:

What is that exactly?

Mobile Bankid? 

That is a login on my bank? That i use over the telephone. I can do all sorts of transactions . Paying my bills,Swish,Vote,and filling in my tax declaration. Check the amount i have left on my account . 

Very nice. Have to order it from my bank. I use a number i log in with. I have the App downloaded in my telephone.

You must have something similar in our countries? 

Edited by rogart63
Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
  • Author
Posted
1 minute ago, jdm said:

I don't understand how would you use that with Cousins check-out. They only accept debit or credit cards.

I have my credit card attached to my Bankid. So in order to pay the parts i order i have to open my bankid app. Enter the number that i have for openig my bankid app? 

Then i can pay my order from cousinsuk. 

Sort of making it harder to scam or getting hold of my mastercard number? 

 

Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
  • Author
Posted

See if i can explain? 

Lets say i order from cousinsuk or any other site that use this kind of verification system? 

It's comes from my bank. Verified by Mastercard or Visa . They have an extra control after all the other parts you have to go thru to make the order or buy. 

I do my order. Then there comes up a verfication form from Mastercard or Visa that i have to fill in. Have a special password that i use for that. 

But now that didn't work. So i had to do the complete verification thru my phone

It sure is complicated?

 

Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
I have my credit card attached to my Bankid. So in order to pay the parts i order i have to open my bankid app. Enter the number that i have for openig my bankid app? 
Then i can pay my order from cousinsuk. 
Sort of making it harder to scam or getting hold of my mastercard number? 

You are using one-time virtual c/c numbers. But the issue here is not scamming, is being unable to pay with a legitimate c/c.
Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
  • Author
Posted
7 minutes ago, jdm said:


You are using one-time virtual c/c numbers. But the issue here is not scamming, is being unable to pay with a legitimate c/c.

Yes. They have somehow changed the system before the end of it's  time. The old system was going  to get changed anyhow  in October? 

I guess they changed it now instead. This weekend. 

Something i didn't now.? Making it much more difficult to do the order? 

Working fine when you now how you should do it. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Waggy
      Movement holder made with 3D printer

      By Waggy · Posted

      So here is the new base, I made it so that the base will fit over and swallow the stump of the hand pusher tool (or at least my clone of the tool), I also reduced the OD of the bottom skirt a little as it looked a little large, here are a few pictures and the fake .pdf file which you need to convert to .zip once downloaded. The cut-out seen on the below image on the bottom of the base should swallow the OD (40 mm, +0.1 mm tolerance) of the stump and the height of the stump 9.5mm (measured to 9.1mm, but rounded to 9.5mm) - let me know if this works for your tool. Note, I think you may need to print supports for the new internal shelf created? Modular Movement Holder v2.pdf Modular Movement Holder v2.pdf
    • HectorLooi
      Balance spring fell out of regulator pin.

      By HectorLooi · Posted

      Hi Frank, you have dived headlong into the deep end. Hairspring work has to be the scariest thing a newbie has to tackle. Your hairspring appears to be bent and just putting it back into the regulator would not allow the balance to work properly. It might start oscillating but the performance would not be good. The proper thing to do is to unstud the hairspring, remove the hairspring from the balance, reinstall the hairspring on the stud carrier, reshape the endcurve and centre the collet to the balance jewel hole. This challenge would either make you or break you. Hope that you will be able to fix your watch. Welcome to the world of watchmaking. 
    • Curare
      Balance spring fell out of regulator pin.

      By Curare · Posted

      Have read of the Tech Sheet attached on the balance section page 12. It may be bent but until you reposition it back in the regulator pins you'll never know. Cheers CJ 4R35B_4R36A.pdf
    • Hawaiikook808
      Balance spring fell out of regulator pin.

      By Hawaiikook808 · Posted

      Aloha All, My Seiko 4R35B movement stopped working today. Upon closer inspection, it looks like the balance spring came out of the regulator pin. This is my first time working on a balance. Any advice on how to get this spring repositioned (back to normal)? I'm pretty sure that while adjusting the beat error on this movement, I must have turned the stud (I didn't even know they turned), and the spring eventually fell out.  Will the spring go back to even spacing when it's back in the pin, or does it look bent? Thanks, Frank  
    • GuyMontag
      1972 Bulova President "E" Sea King 11ACACB movement

      By GuyMontag · Posted

      Good job, that band matches the watch perfectly.
×
×
  • Create New...