Jump to content

Tools & Equipment


Subforums

  1. Eyeglasses, Loupe's, Microscopes and other Optics

    Discussing Watchmakers Eyeglasses, Magnification, Microscopes, Loupes and general Optics used in Horology

    1.3k
    posts
  2. Starter Tools, Toolkits, Recommendations and Tools Suppliers

    Discussing recommended tools for getting started - toolkits and suppliers of tools

    942
    posts
  3. What is this tool? How do I use it? Tools Identification

    Have a watch repair tool and unsure what its used for or how to use it - post here.

    1.1k
    posts
  4. Lubrication Tools and Products

    Discussing lubricants tools used for lubricating watch movements.

    841
    posts
  5. Watch Case Tools - Glass Fitting/Removal - Case Opening/Closing

    Discussing tools in relation to the watch case including glass fitting and removal, opening and closing of watch cases, crowns/pendant tubes/pushers etc...

    560
    posts
  6. Mainspring and Winding Tools

    Discussions on winding mainsprings back into the Going Barrel.

    1.3k
    posts
  7. Hand Tools including Screwdrivers, Tweezers

    Discussing watch repairers screwdrivers, tweezers and other small hand tools not falling into any other category.

    1.2k
    posts
  8. Staking Tools & Jewel Setting Tools

    Discussing Staking Toolkits and Jewel Setting Tools and Kits

    1.1k
    posts
  9. Toolmaking, Tools Restoration, Bespoke Tools and 3D Printing Tools

    Making your own tools? This section covers traditional toolmaking and restoration, manufacturing bespoke tools to solve watchmaking issues and using modern technologies such as 3D printing to create new tools.

    643
    posts
  10. Lathes for Watchmakers / Mini Lathes & Jacot tools and all related

    Discussions on Watchmakers or Mini Lathes and associated Accessories as well as Jacot tools and their accessories

    1.9k
    posts
  11. Watch Timing & Testing Equipment / Timegraphers

    Discussions on Watch Timing Machines / Testing Machines / Timegraphers / Calibration Equipment / Water Resistance Testing

    2.4k
    posts
  12. Watch Cleaning Machines / Ultrasonic Cleaners / Case Refinishing

    Discuss watch cleaning machines, ultrasonic machines and case refinishing.

    4.5k
    posts
  13. Workbench, Bench Lighting and General Workshop Design

    Discussing your work area. Show off your workbench, discuss lighting or general workbench/work area design.

    758
    posts

1203 topics in this forum

    • 0 replies
    • 2.3k views
    • 166 replies
    • 36.8k views
    • 110 replies
    • 31.1k views
    • 103 replies
    • 57k views
    • 78 replies
    • 14k views
  1. Cheap Pegwood 1 2 3

    • 69 replies
    • 20.7k views
  2. Balance tack? 1 2 3

    • 63 replies
    • 12.9k views
    • 62 replies
    • 21k views
    • 51 replies
    • 21.3k views
    • 50 replies
    • 16.1k views
  3. Tool porn! 1 2

    • 49 replies
    • 12.9k views
    • 49 replies
    • 11.1k views
  4. WOS mic & watch holder. 1 2

    • 48 replies
    • 13.8k views
  5. Waterproof Testers 1 2

    • 41 replies
    • 18.1k views
  6. Always One More Tool :) 1 2

    • 41 replies
    • 11.1k views
  7. Watch Hand Press 1 2

    • 41 replies
    • 8.9k views
    • 41 replies
    • 9.5k views
  8. Bronze Tweezers 1 2

    • 40 replies
    • 12.8k views
    • 40 replies
    • 12.1k views
    • 38 replies
    • 13k views
    • 38 replies
    • 11.2k views
    • 38 replies
    • 22.3k views
  9. My Workbench.... 1 2

    • 37 replies
    • 8.8k views
    • 37 replies
    • 9.6k views
    • 36 replies
    • 8.5k views


  • Topics

  • Posts

    • Hi all Thought I'd show my small and trying to keep under control watch collection! Apart from the Enicar all were under £12! At least if I destroy them in the process then I won't be too worse off. A few pics to start off with First of all my first attempt. A Thuya pocket watch. It was only running face down and would stop when vertical. So now it still works face down and only slows down when vertical so at least an improvement! 😄  I only have a generic watch oil at the mo so that won't help but I'm hoping to get some more appropriate oils in a couple of months for my birthday. I did have to get a crystal for it since it didn't come with one. It didn't look as though it would friction fit (and I don't have a crystal press in any case) so I glued it to the case with PVA. So far so good. Next up above are a sekonda and citizen automatic. Both non runners. Both with broken balance wheels amongst other things. I'm hopeful the citizen will start when I get the new one I ordered but the sekonda is being kept for spares and trial of new techniques. And finally the Enicar and the timemaster. Both running when I got them. I wanted to get running watches so that at least I stood a fighting chance of still having a running watch after the service! It was all going well on the Enicar until I dropped the balance wheel during reassembly...😔. Unfortunately they are quite expensive to get so for now I'll won't do anything with it but I would like to fix it at one point. The timemaster is still running (yeah!) but I managed to break a dial foot during the deassembly. First repair attempt failed so now I am looking at soldering it back on... So there we go. My initial foray into this great hobby. Thanks for sticking with this tale so far.  I'm hoping that once the balance wheel arrives for the citizen I will be able to say I bought a non runner and fixed it! So fingers crossed. Thanks for looking, Nick
    • Like losing Ranfft. That was a wake up call. We took his website for granted. Miss him terribly.  
    • Its 4 o'clock in the morning here in the Uk, i cant sleep, i dont sleep, not much ever really. My brain never shuts off to rest, I'm just a constant thinker, i have to be very tired to be able to sleep,  i guess eventually it will be my undoing and my health will suffer because of it I'm sure. But while I'm here i want to get as much out of life as i can, and give as much as i can, to help,maybe to make a difference to someone's life if that is within my capability,recent events have made that need even more clear to me. I'm not sure where I'm going with this or why i bring it up , or if its relevant to want i want to talk about its just in my head right now. What i do want to talk about is something thats been on my mind for ages. I like to be prepared,  I'm not fond of surprises because surprises take control away and i am a bit of a control freak at times. This forum, Our Forum if i can call it that, is here because of two reasons. The guy that created it and keeps it funded and the people that joined it.  Without either, it would not exist, and lets face it one day it won't ( I'm a realist and i talk about things others dont or who are afraid to in other words folk that dont particularly prepare for the inevitable). How many of us visit here regularly ?  How many among us almost depend on the forum as a way of socialising because they are stuck at home and how many of us has it become part of a daily routine to check in and see if they can offer advice or get help with something they are working on or just to have a chat and engage in some banter. The members here are in the thousands and thousands have disappeared over the years many had just a fleeting visit. But there are a good few of us that know each other quite well and visit regularly. I dont know about you but i wouldnt want to lose that communication with you all, in all honesty it has become an important part of that side of my life and helps to feed my passion for all things watches. Some of you may think differently and thats ok, some of may stop and think # what would i do " Without Our Forum " # 
    • Naptha appears to be a general name and its content can be varied depending upon what it's specific use is. Lighter fluid as an example can be light or heavier also with other ingredients to help it burn. Try sesrching for benzine ( as opposed to benzene which is linked to causing health issues ) . There are other fluids such as ethanol that you could try and also methylated sprirts, mostly ethanol with a small percentage of methanol added. Experiment with any new chemical to see how quickly schellac dissolves in its presence. I have tried a few things but hexane is not one of them, i understand it does evaporate very quickly.  Be sure sure to check out any safety data on chemicals you try. Toxicity of fumes and flash point information, ultrasonic machines can heat up fluids even without a heater function. And of course always ask here for personal opinions when trying a new substance. 
    • I have that set and really like it. I prefer that crystal holder over the one that came with my Bergeon claw tool and any time I use the claw I use this one instead of the Bergeon one, just an additional bonus with this tool.
×
×
  • Create New...